
Manufacturing Warehouse Automation: WMS, Bin Locations, E-aktiv, and E-Waybills
How to set up bin-location storage at a factory in Uzbekistan, deploy handheld terminals, and sync raw material and finished goods workflows with 1C, E-aktiv, and mandatory electronic waybills.
Warehouse automation for manufacturing facilities in Uzbekistan demands both real-time physical inventory control and strict tax compliance: batch-wise material write-offs matched by MXIK (IKPU) codes in E-aktiv alongside compliant electronic waybills (ETTN). Deploying a baseline shop-floor inventory system typically starts from 10–25 million UZS (so'm), while implementing a full-scale bin-location warehouse management system (WMS) for an industrial plant takes 2 to 6 months based on our project experience.
In brief
- A factory warehouse must be split into at least three distinct zones: raw materials storage, shop-floor work-in-progress (WIP) buffer, and finished goods inventory.
- As of July 1, 2024, issuing electronic waybills (ETTN) is mandatory for all businesses under Cabinet of Ministers Resolutions No. 673 and No. 168, requiring E-imzo or Face-ID verification and an auto-generated QR code.
- Writing off raw materials into production must be reported to the Tax Committee's E-aktiv system strictly mapped to MXIK (IKPU) classification codes per Resolution No. 595.
- An industrial mobile data terminal costs 3,500,000 — 8,500,000 UZS (so'm) according to ba-it.uz, while a 1C:WMS software license starts from 71,972,000 UZS (so'm) according to leading.uz.
Three Core Loops of Factory Warehouse Tracking
You cannot run a manufacturing warehouse as a single flat list like a retail store. If raw materials are written off to expense the moment they leave the main stockroom, an operational "black hole" opens up: supplies have vanished from stock, finished products have not arrived yet, and actual inventory on the shop floor remains completely opaque. Sound manufacturing automation always relies on a three-tier model.
- Raw Materials and Components Warehouse. The receiving dock for supplier deliveries. Strict batch/lot tracking, incoming quality inspection, and pallet/container labeling are essential here. Inbound shipments are registered by MXIK (IKPU) codes to ensure accurate reporting in E-aktiv.
- Shop-Floor Buffer (WIP). Intermediate storage holding semi-finished goods and work-in-progress inventory. Materials move here via internal transfer notes. Raw materials are not written off upon entering the shop floor; they are expensed only when finished production runs are confirmed against production bills of materials (BOM / specifications).
- Finished Goods Warehouse (FGW). This holds packaged products ready for distribution. It utilizes bin-location storage, barcode-assisted picking, and automated generation of outbound transport manifests.
Mandatory Integrations: E-aktiv and ETTN
In Uzbekistan, factory warehouse software cannot operate as an isolated silo. State regulatory platforms turn physical-to-accounting inventory discrepancies into immediate tax risks.
According to Cabinet of Ministers Resolution No. 595 of September 22, 2021, enterprises must log intra-warehouse raw material transfers and manufacturing write-offs in the E-aktiv system mapped to MXIK (IKPU) codes. If physical inventory is mislabeled or written off under mismatched classification codes, the plant's official tax balance sheet will diverge from real-world stock levels.
The second mandatory compliance layer is the electronic consignment note (ETTN). According to Buxgalter.uz and Resolutions No. 673 and No. 168, issuing digital ETTN waybills became mandatory for all commercial enterprises on July 1, 2024. Every vehicle transporting finished goods from the plant gate must carry an active document verified by the shipper, carrier, and consignee via E-imzo digital signatures, with a valid QR code issued to the driver for roadside transport inspections.
Hardware and Software: Options and Budgets
Selecting the right technology stack depends on inventory SKU counts and physical facility footprint.
| Solution | Software Licenses & Setup | Hardware | Deployment Timeline | Best Suited For |
|---|---|---|---|---|
| Bin-location tracking on 1C:UNF / 1C:Trade | Implementation from 10–25M UZS (so'm) (leading.uz) | 1–2 mobile terminals (from 3.5M UZS (so'm)) & thermal printer (from 2.8M UZS (so'm)) | 3–6 weeks | Small workshops, up to 300 raw material SKUs, simple assembly lines |
| Full-featured 1C:WMS Logistics platform | License from 71,972,000 UZS (so'm) (leading.uz) | Fleet of rugged data terminals, barcode-labeled pallet and rack locations | 2–5 months | Large industrial plants, distribution hubs, high-bay racking facilities |
| Custom WMS / Proprietary Warehouse Portal | Based on our project experience: 40–90M UZS (so'm) | Tablets, ruggedized 2D barcode terminals | 6–10 weeks | Non-standard lines, integrated raw material weighing, IoT hardware links |
For paperless mobility on the floor, storekeepers and floor operators use rugged Android data collection terminals. An industrial handheld terminal with 2D DataMatrix scanning capabilities runs between 3,500,000 and 8,500,000 UZS (so'm) per device, while a dedicated industrial thermal transfer label printer starts at 2,800,000 UZS (so'm) based on data from ba-it.uz.
If you are just starting
If you are setting up a brand-new production line, resist the urge to immediately install a bloated WMS with dynamic wave routing. Focus on fundamental inventory discipline first.
- Standardize your item master catalog and link MXIK (IKPU). Every incoming component and finished SKU must map to a single verified MXIK code and standard unit of measurement (meters, kilograms, units). Packaging conversions into base inventory units must happen automatically upon receipt.
- Physically segment your facility. Mark distinct operational zones: raw material shelving, scrap/rejection shelf, machine-side WIP staging, and the shipping dock. Apply clear, human-readable alphanumeric labels (Aisle-Rack-Shelf).
- Configure core software. A standard 1C configuration or a specialized cloud inventory setup paired with a basic barcode scanner is plenty to start. Budget around 10–25 million UZS (so'm) for software setup and roughly 6–10 million UZS (so'm) for foundational hardware.
- Enforce BOM-based material write-offs. Do not let operators pull supplies without registering an internal transfer note to the floor. We explored the operational architecture behind this in detail in our guide on ERP for manufacturing in Uzbekistan.
If your business is already running
For an active manufacturing plant, the core challenge is migrating to bin locations and mobile barcode scanners without halting active production shifts or customer dispatches. Use a phased cutover approach.
- Facility audit and warehouse topology. Measure storage areas, plan rack locations and pallet positions, and print durable metallic or composite barcode labels for all beams and uprights.
- Cycle counting without operational downtime. Perform stock reconciliation zone by zone during weekend shifts. Once a bay is verified and barcoded, import it directly into the system with exact batch numbers and expiry/manufacturing dates.
- End-to-end integration with ETTN. Configure your system so that once picking is finalized on the mobile terminal, the transport order flows immediately into the electronic document exchange module, gets signed via E-imzo, and outputs a valid QR code for the driver before the truck clears the gate.
- Direct sync with E-aktiv. Stock transfers between facilities and production consumption vouchers must replicate directly into the tax platform without manual accounting re-entry. If your plant also handles direct consumer fulfillment, review our breakdown on warehouse tracking for online stores.
A real case: End-to-end fabric traceability and digital packing slips
Uzcotton, a leading textile producer operating 14 industrial sites and wholesale depots across Uzbekistan, struggled with sluggish manual intake workflows, mislabeled fabric rolls, and persistent discrepancies between sewing lines and central stockrooms, as reported by alexrovich.ru.
The company modernized its production logistics by deploying continuous batch-level tracking and dynamic digital packing slips (roll, box, pallet). Inter-shop stock handoffs were transitioned to fast barcode scans on handheld mobile terminals, eliminating manual piece-by-piece inspections for every batch of fabric.
As a result, raw material receiving and dispatch fulfillment accelerated by 3x–5x, while inventory transfer discrepancies between production floors and the central distribution hub were completely eliminated.
A real case: Bin-location tracking and expiration management
Pharmaceutical holding company Dori-Darmon, which runs a nationwide network of manufacturing and logistics complexes in Uzbekistan, required stringent control over batch numbers, FEFO expiration sequencing, and temperature-controlled storage zones for sensitive compounds, according to leadwms.ru.
To solve this, they implemented a specialized WMS featuring dynamic bin allocation, automated route optimization for pickers, and direct telemetry links to packaging and bottling lines.
The implementation completely eliminated picking errors for expiring pharmaceuticals, and the company's warehouse facility successfully secured compliance certification under international Good Distribution Practice (GDP) standards.
Common Pitfalls in Factory Warehouse Automation
- Attempting barcode scanning without cleaning up your product catalog. If the same metal profile or industrial chemical exists under three different names in your database, handheld scanners will not fix the issue—they will merely digitize the chaos.
- Ignoring catch-weight and measured bulk goods. Liquids, rolled steel, or bulk powders require direct scale integrations and density conversion rules; otherwise, physical bin stock and E-aktiv numbers will drift apart within a week.
- Cluttered mobile terminal interfaces. Storekeepers and line workers operate wearing heavy gloves amid factory noise and dust. Keep the mobile workflow dead simple: "Scan Location", "Scan Item", "Confirm Quantity".
Frequently Asked Questions
What warehouse software is best suited for factories in Uzbekistan?
For small and mid-sized operations, platforms based on 1C (such as 1C:UNF or 1C:Trade customized for manufacturing) are practical options thanks to native tax reporting connectors. For large plants with multi-tier high-bay racking, dedicated solutions like 1C:WMS or custom web-based warehouse management systems are preferred.
How much does WMS implementation cost for a manufacturing facility in Tashkent?
Enterprise software licensing (such as 1C:WMS) starts from 71,972,000 UZS (so'm) according to leading.uz. Configuring workflows across raw materials, WIP buffers, and finished stock through integration partners typically ranges from 30 to 80 million UZS (so'm) based on our project experience, depending on routing complexity and the number of mobile devices deployed.
How do you link bin-location storage with E-aktiv and mandatory electronic waybills (ETTN)?
Connectivity is handled via specialized integration modules and APIs. When order staging is confirmed on a mobile terminal, the system automatically drafts an electronic waybill, signs it using the responsible party's E-imzo digital key, registers it with the state portal, and returns the transport QR code. Production consumption vouchers automatically reduce active balances under corresponding MXIK (IKPU) codes in E-aktiv.
If you want to introduce structured bin locations, equip your staff with handheld barcode terminals, and unify manufacturing inventory with core business accounts, explore our automation design and implementation services or drop us a message through our contacts page to discuss your facility's requirements with NDC engineers.
Sources
- Uzcotton · alexrovich.ru
- АК «Dori-Darmon» · leadwms.ru
- Положение о порядке оформления товарно-транспортных накладных в электронной форме (ПКМ № 673 / ПКМ № 168)
- 1С:WMS Логистика. Управление складом — стоимость и внедрение в Узбекистане
- Автоматизация склада и внедрение систем учета в Ташкенте — CloudPlus
- Оформление ЭТТН и порядок подтверждения отгрузок — Buxgalter.uz
- ba-it.uz


